The Tobotic Arm For 150-200T Injection Machine (AD750ISM)

1. high-speed,small Beam Robot arm 2. precise 3. stable 4. for 50-100tons injection molding machine

                The Tobotic Arm For 150-200T Injection Machine (AD750ISM) 

AD Series Small beam robot  is mainly suitable for 50-200 ton horizontal injection molding machine for finished product and runner removed from the mold , up and down arms with cut-and-two-sectional, stalking can be used pneumatic driven, inverter motor driven and AC servo motor driving, suitable for two and three platen molds. may improve productivity (20%-30%), lower product defective rates and save the output of manpower, precise control and protection of the operator's safety.

Features

1.Transverse can be used imported NON-Rod cylinder, inverter motor or AC servo motor driving, plus two sets of imported high rigid precision linear Rails,stable running,low noise,lower friction coefficient, durable;

2.Stop using single-arm-importation of high rigid precision linear Rails and bottom structure,optional two-sectional-arm, special belt speed structure design, you only need half of the stroke to reach up and down the whole itinerary significantly shortened arm height of structure, improve the speed and top and bottom line, and be compatible with the stability of the plant height low places.

3.Auto-detection of security, such as the pressure is insufficient or unexpected failure will automatically alarm and automatic ejection prevention into cylinder, guarantee the mechanical arm and mold safety;

4.Optional CE models that conform to the standard EUROMAP/SPI and configure standard interfaces.

General Specification

Power source	Working pressure	Max.allowed pressure	Drive system	Swivel	Control system
3 phase AC220v±10v 50/60HZ	5kgf / cm2   0.49Mpa	8kgf /cm2   0.8Mpa	S5-AC servo motor S3-pneumatic cylinder for sub arm	90°Fixed Pneumatic	Micro computer

Main Specification

Model	AD650 ID/IS/WD/WS -S3/S5	AD750 ID/IS/WD/WS -S3/S5	AD850 ID/IS/WD/WS -S3/S5	AD950 ID/IS/WD/WS -S3/S5	AD1000 ID/IS/WD/WS -S3/S5	AD1100 ID/IS/WD/WS -S3/S5
Power Capacity(KVA)	1.5/2	1.5/2	2.5/3.8	2.5/3.8	3/5	3/5
Recommended IMM(ton)	50-150	80-200	120-250	200-350	350-450	350-550
Traverse Stroke(mm)	1250(1450)		1450(1550)	1550(1750)	1800(2000)
Crosswise Stroke(mm)	S3: P:500 R:100 S5:P:500 R:300	S3: P:500 R:100 S5:P:500 R:300	S3: P:700 R:100 S5:P:700 R:400	S3: P:700 R:100 S5:P:700 R:400	S3: P:900 R:100 S5:P:900 R:500	S3: P:900 R:100 S5:P:900 R:500
Vertical Stroke(mm)	650	750	850	950	1050	1150
Max. loading(kg)	5				10
Dry Take Out Time(sec)	0.5	0.6	0.65	0.7	0.7	0.8
Dry Cycle Time (sec)	4.8	4.8	5	5.5	5.8	6
Air Consumption(NI/cycle)	3			5
Net Weight(kg)	180-230	185-235	210-250	220-260	335-370	355-380

 )Denoted option spec.:“P”: product arm“R”: runner arm

Model denoted: I: single stage “W”: telescopic type“D”: product arm+ runner arm

“S”: product arm“M”: traverse axle driven by inverter motor 

“ Y”: traverse axle driven by AC servo motor

The Tobotic Arm For 150-200T Injection Machine (AD750ISM)